JEBO 200W Aquarium Heater

The JEBO 200W Aquarium Heater is a submersible automatic thermostat heater designed to maintain stable water temperatures in medium-sized tropical fish and turtle tanks. JEBO offers this wattage configuration in two primary builds: High-Impact Safety Glass (like the JEBO 2010 model) and 304 Stainless Steel (like the JEBO Stronger 3018 model).

Key Specifications & Capabilities

Tank Capacity: Optimized for aquariums up to 65 gallons (or roughly 200 liters).
Physical Length: Measures approximately 12.6 inches (32 cm) in length.
Temperature Control Range: Adjustable via a mechanical top knob between 18°C to 32°C (64°F to 90°F).
Thermostat Automation: Operates on a mechanical automatic thermostat that shuts off power immediately when the water reaches the set temperature and restarts when it cools down.
Electrical Requirements: Typically rated for AC 220V–240V at 50Hz, commonly featuring a standard two-pin plug configuration.

Material Variants: The glass model is constructed with high-impact, thermal-resistant safety glass. The stainless steel version utilizes seamless, explosion-proof 304 stainless steel, though it is strictly rated for freshwater and turtle tanks only (not suitable for marine reef environments due to salt corrosion).
- Safety Insulation: Fully submersible construction utilizing double-layered waterproof insulation.
- Visual Indicator: Equipped with a built-in red indicator light that turns on during active heating cycles and shuts off during thermal insulation mode.
- Installation: Packaged with heavy-duty suction cups and mounting clips, designed for horizontal, vertical, or angled placement inside the tank water column.
Important Usage Precautions
1. The Minimum Water Line: Always submerge the heating element completely past the marked "MINIMUM" water line before plugging it in to avoid thermal shock or shattering.
2. Water Flow Placement: Position the heater near an active water pump or filter outlet. Good water circulation prevents localized "hot spots" and ensures uniform tank temperatures.
3. Water Changes: Always disconnect the power plug and allow the unit to cool down for at least 15–20 minutes before performing water changes or removing the heater from the aquarium.